Damp in older Chatham homes
Damp in an older house is often not what it first appears. Getting the cause right before spending money is the difference between a lasting fix and an expensive disappointment.
Know the three common causes
Rising damp comes up from the ground through a failed or missing damp course. Penetrating damp comes in from outside, through a leaking gutter, bad pointing or a faulty roof detail. Condensation forms on cold surfaces when moist air cannot escape. They can look alike, and all three can occur in the same house.
Look outside before you look inside
Overflowing gutters, a broken downpipe, a raised path or patio sitting above the damp course, and a flowerbed against the wall all push water into brickwork. In many terraced streets around Chatham and Luton, yards have been paved over several times, and the ground level can end up higher than the original damp course. Fixing these costs far less than injecting walls.
Older walls need to breathe
Victorian and Edwardian houses are often built with soft bricks and lime mortar that absorb and release moisture. Hard cement render, gypsum plaster and impermeable paint can trap it, so the damp shows up elsewhere. A repair that suits the wall lets moisture escape, and your builder should be able to explain how the chosen method does that.
Ventilation and heating
A lot of what is called damp in newer, well-sealed windows and doors is condensation. Extractor fans that vent outside, keeping the house gently heated, and not drying washing on radiators all reduce it. Mould in the corners of a cold bedroom is often condensation, not a building fault.
What to ask before agreeing a treatment
Ask what the cause is, how it was found and what else was ruled out. Ask whether a handheld moisture meter was the only evidence. Ask what the treatment does and what could cause it to fail. If a company offers a free survey and then quotes a single large treatment, consider getting an independent opinion before you sign.
When it is a building job
If damp has damaged plaster, joists or skirting, those need repairing once the cause is dealt with. We can help with that stage, and we tell you honestly if we think the problem is something else.
Chimneys, roofs and parapets
Damp near a chimney breast often comes from a failing flashing, cracked flaunching around the pots or rain getting down an unused flue. Damp on an upper floor can come from the roof, not the ground. Always trace damp upwards as well as downwards before deciding on a cause.
Cavity walls and later alterations
Houses from the early twentieth century onwards often have cavity walls, and damp can come from blocked cavities or from poorly fitted insulation. Later extensions may have been joined to the old house with a poor damp-proof detail. Look for damp at the join between old and new work.
Moisture meters and what they tell you
A moisture meter gives a reading, not a diagnosis. Readings can be raised by salts, by foil-backed plasterboard or by condensation, so a high reading alone does not mean rising damp. A competent surveyor uses several methods and looks at the building as a whole.
Fixing it for good
Once the cause has been found and dealt with, give the wall time to dry. Then repair plaster and decoration with materials that suit the wall. Avoid sealing the wall with impermeable coatings. Keep gutters clear, and check the building each autumn so that small problems do not become large ones.
A sensible first step
Before paying for treatment, tidy the outside. Clear gutters, check downpipes, lower any soil or paving that has crept above the damp course and keep air bricks open. Then watch the wall for a few weeks. If the damp improves, you have probably saved yourself a lot of money.
Related pages
See room renovations, the notes for Luton and the guide to what a builder's quote should include.
Free site visit and quote
Tell us about the project at hello@chathambuilders.co.uk or on WhatsApp. We'll arrange a site visit to give you a proper quote.