Knocking through walls and steel beams
Opening a kitchen into a dining room is one of the most common projects in Medway houses. The wall may look simple, but taking it out safely depends on knowing what it holds up.
Is the wall load-bearing?
Many internal walls carry the floor or roof above, and some that look like partitions do too. You cannot tell reliably from the room. A builder or engineer looks at the joist direction upstairs, the roof structure and what sits on top. In a house that has been altered before, as many have, assume nothing until it has been checked.
The engineer and the calculations
If the wall carries load, a structural engineer works out the size of beam needed and what supports it at each end. Building control uses those calculations to approve the work. Taking out a load-bearing wall without them is not a risk worth taking, and a missing calculation can cause problems when you sell.
Props, beam and padstones
The work usually starts with temporary props to hold the floor above, then the wall is removed in a controlled way and a steel beam is lifted into place. The beam sits on padstones or other bearings that spread the load into the walls beneath. Steel is heavy and awkward, so access to the room matters, and a narrow terrace can mean the beam is carried through the house.
Fire protection and finishing
Steel beams normally need to be encased or protected to meet fire requirements, and the structure often has to be inspected before it is covered up. After that come plastering, making good the floors and ceilings, and decoration. The beam is often boxed in below the ceiling or hidden within the floor depth, depending on the design.
Dust, noise and what to expect
This is a messy job. Expect a lot of dust, a day of loud work and some disruption to heating or electrics if they run through the wall. Moving furniture out and sealing doors helps. Plan to have the room unusable for a while.
Party walls and neighbours
If the wall is shared with a neighbour, or the beam bears into one, the Party Wall etc. Act 1996 may apply. Raise it before work starts.
Making the opening work
Think about what the new opening will look like. A wide opening with a visible beam can look good if it is designed well, while a poorly sized or placed one can leave awkward downstands. Your engineer's calculation sets the minimum size, but the choice between a beam below the ceiling and one hidden in the floor above is partly a design decision, and has cost consequences.
Services in the wall
Walls often contain cables, pipes, radiators or a gas pipe. These need to be traced and diverted before the work starts. Heating pipes and electrical circuits that run through the wall may mean the heating or lights are off for a time. Ask your builder to identify them at the visit.
Floors and finishes
When two rooms become one, the floor finishes rarely match across the join. Plan how the floor will be levelled and finished, and whether new flooring across the whole room is worth doing. The same is true of ceilings and skirting boards. A good builder will talk through these details in advance.
Cost and time
The beam itself is only part of the cost. Engineering, building control fees, propping, making good and decoration all add up. Ask for a quote that lists them. The structural work is often quick, but drying and finishing take time, so do not plan a party for the following weekend.
Questions to ask first
Ask who is arranging the engineer's calculations, who is dealing with building control, how the floor above will be supported, and how dust will be contained. Ask whether the beam size is allowed for in the price and what happens if the engineer asks for a bigger one.
Related pages
See room renovations, Lordswood and the guide to Building Regulations sign-off.
Free site visit and quote
Tell us about the project at hello@chathambuilders.co.uk or on WhatsApp. We'll arrange a site visit to give you a proper quote.